2.5" SSD驱动器

SV250-25 CoreRescue ASR

2.5" SSD驱动器

SV250-25 CoreRescue ASR

  • CoreRescue ASR (Auto Self Recovery)
  • Low-Density Parity-Check (LDPC) Code
  • Global Wear Leveling
  • Flash bad-block management
  • Flash Translation Layer: Page Mapping
  • S.M.A.R.T.
  • DataDefender™
  • Device Sleep
  • ATA Secure Erase
  • TRIM
  • Hyper Cache Technology
  • Over-provisioning
  • SMART Read Refresh™

Apacer’s SV250-25 is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6 Gb/s interface, SV250-25 provides full compliance with the latest SATA Revision 3.2 interface specifications and delivers exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations.

Utilizing 3D NAND for higher capacity up to 480GB and providing more power efficiency than 2D NAND, SV250-25 is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, SV250-25 is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.

Security-wise, Advanced Encryption Standard (AES) ensures data security and provides you with peace of mind knowing your data is safeguarded against unauthorized use at all times.

On top of that, SV250-25 features CoreRescue ASR (Auto Self Recovery), enabling the creation of the world's first SSD with automatic backup and recovery capabilities that can be activated and executed within seconds. With AI-driven detection and automated responses, your data is shielded from unexpected losses, offering truly unmanned management.

规格表
  • 型号
    SV250-25 CoreRescue ASR
  • 介面
    SATA 3.2 (6Gb/s)
  • 接口
    (7+15) pin male
  • 板型
    2.5”
  • NAND 颗粒
    3D TLC
  • 容量
    60-480GB
  • 外置DRAM
    No
  • 读取速度(MB/sec)
    Up to 560
  • 写入速度(MB/sec)
    Up to 510
  • ECC纠错功能
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K 随机写入)
    74K
  • 标准作业温度(°C)
    0 ~ + 70
  • 最高作业温度(°C)
    -40°C to 85°C
  • 放置温度(°C)
    -55°C to 100°C
  • 外壳
    Yes
  • 温度感测功能
    Yes
  • 冲击耐力
    Operation: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Acceleration, 1500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • 震动耐力
    Operation:7.69(Grms), 20~2000(Hz)/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02(Grms), 15~2000(Hz)/random
    (compliant with MIL-STD-810G)
  • 电压
    5.0 V ± 10%
  • 用电量
    Active mode: 265 mA /Idle mode:50 mA
  • 尺寸 (L x W x H )
    100.00 x 69.85 x 6.90, unit: mm
  • MTBF (小时)
    >3,000,000

如有进一步需求 欢迎与我们联系

若您有任何需要我们服务的地方,欢迎来信询问,我们收到您的来信后将尽速回覆!