Module

UH110-UFM1

Module

UH110-UFM1

  • Low-Density Parity-Check (LDPC) Code
  • Flash bad-block management
  • Global Wear Leveling
  • Flash Translation Layer: Page Mapping
  • S.M.A.R.T.
  • Smart Read Refresh™
  • SLC-liteX

Industrial USB Module: UH110-UFM1

Apacer’s UH110-UFM1 is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. As an embedded flash storage, UH110-UFM1 is compliant with USB 2.0 and backward compliable with USB 1.1.
Utilizing 3D NAND for capacity up to 64GB and providing more power efficiency than 2D NAND, UH110-UFM1 can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems.
Regarding reliability, UH110-UFM1 is not only implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability, but also equipped with SLC-liteX technology to offer higher number of P/E cycles up to 30,000 times.
In terms of flash management, UH110-UFM1 adopts the latest Page Mapping file translation layer and comes with various implementations including power saving modes, Wear Leveling, flash block management, power failure management, S.M.A.R.T. and Smart Read Refresh™.
UH110-UFM1 is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability.

Spec
  • Model
    UH110-UFM1
  • Interface
    USB 2.0
  • Connector
    10-pin USB (2 x 5 header)
  • Form Factor
    USB Disk Module
  • NAND Flash Type
    3D TLC
  • Capacity
    32GB~64GB
  • Sequential Read Performance (MB/sec)
    Up to 37
  • Sequential Write Performance (MB/sec)
    Up to 32
  • ECC Engine
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write)
    400
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Extended Operating Temperature(°C )
    -40 ~ + 85
  • Storage Temperature(°C )
    -55 ~ + 100
  • Housing
    No
  • H/W Write Protect
    Optional
  • Screw Hole
    Yes
  • Shock
    Operation: 50G/11ms
    (compliant with MIL-STD-202G)
    Non-operation: 1500G/0.5ms
    (compliant with MIL-STD-883K)
  • Vibration
    Operation:7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    5.0 V ± 5%
  • Power Consumption
    Active mode: 95 mA; Idle mode: 75 mA
  • Dimension (L x W x H )
    37.80 x 26.65 x 10.91 mm
  • MTBF (hours)
    >3,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.