Drive

UV110-UFD5

Drive

UV110-UFD5

  • ESD Prevention:
  • Air discharge ±15KV
  • Contact discharge ±8KV
  • Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
  • Global Wear Leveling
  • Flash bad-block management
  • 4K Page Mapping
  • Power Failure Management
  • S.M.A.R.T.
  • Hyper Cache Te

Industrial USB: UV110-UFD5

Apacer’s UV110-UFD5 utilizes 3D NAND for higher capacity up to 256GB, provides more power efficiency than 2D NAND and enhances environment and ESD protection, with the aim of replacing a conventional IDE hard disk drive.
UV110-UFD5 is a new generation USB flash drive compatible with the latest USB specification – USB 3.2 Gen1 Super Speed, with a maximum transfer rate of 5.0 Gb/s. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.2 specification, this USB drive can deliver up to 270 MB/s outstanding performance.
Reliability wise, UV110-UFD5 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip. In addition, the drive comes with various implementations including powerful hardware ECC engine, Wear Leveling, flash block management, S.M.A.R.T., Page Mapping, etc. This product is well suited for portable flash storage applications while operating at minimal power consumption.

Spec
  • Model
    UV110-UFD5
  • Interface
    USB 3.2 Gen1
  • Connector
    USB Type-A
  • Form Factor
    USB Flash Drive
  • NAND Flash Type
    3D TLC
  • Capacity
    128GB~256GB
  • Sequential Read Performance (MB/sec)
    Up to 270
  • Sequential Write Performance (MB/sec)
    Up to 185
  • ECC Engine
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write)
    900
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Extended Operating Temperature(°C )
    -40 ~ + 85
  • Storage Temperature(°C )
    -40 ~ + 100
  • Housing
    Yes
  • H/W Write Protect
    No
  • Shock
    Operating: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • Vibration
    Operation:7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    5.0 V ± 5%
  • Power Consumption
    Active mode: 200 mA; Idle mode: 85 mA
  • Dimension (L x W x H )
    56.05 x 18.00 x 8.50 mm
  • MTBF (hours)
    >3,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.