SSD Module

SDM5A-M 7P/180D Slim2(H)

SSD Module

SDM5A-M 7P/180D Slim2(H)

  • 7-pin SATA connector
  • Unique Hook Design
  • Power Cable-less Solution
  • TRIM Command Support
  • Product Housing Selection (Optional)
  • Built-in ATA Secure Erase and S.M.A.R.T. Functions
  • Global Wear-Leveling and Block Management

Introduction

Apacer’s SDM5A-M (SATA Disk Module 5A - M) is our next generation disk-on-module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6 Gb/s interface, SDM5A-M delivers exceptional performance in data transfer.

With its SATA interface compliance and compact size, this high-speed disk module defines an ideal balance of performance, capacities, reliability and cost. SDM5A-M comes in moderate capacities that are suitable to boot industrial applications and light operating systems for specific operations, while with some extra memory space for data storage. The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space.

Regarding data reliability, SDM5A-M is built in with powerful ECC engine that can correct up to 40-bit per 1KB data. In addition, the controller unit of this DOM device supports wear-leveling, SMART and power failure management for data integrity. With its trustable reliability, performance and cost effectiveness, Apacer’s SDM5A-M is definitely the ideal storage or cache solution for embedded and industrial computers, servers and thin clients.

Spec
  • Model
    SDM5A-M 7P/180D Slim2(H)
  • Interface
    SATA 3.2 (6Gb/s)
  • Connector
    7-pin male
  • Form Factor
    SSD Module
  • NAND Flash Type
    MLC
  • Capacity
    4GB~32GB
  • External DRAM
    No
  • Sequential Read Performance (MB/sec)
    Up to 120
  • Sequential Write Performance (MB/sec)
    Up to 40
  • ECC Engine
    Built-in 40-bit per 1K bytes BCH ECC
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Extended Operating Temperature(°C )
    -40 ~ + 85
  • Storage Temperature(°C )
    -40 ~ + 100
  • Housing
    Optional
  • H/W Write Protect
    No
  • Screw Hole
    No
  • Cable-less Solution
    Optional (7+2 cable-less, Pin 7 Power cable-less)
  • Shock
    Operation: 50G, 11ms
    Non-operation: 1500G, 0.5ms
  • Vibration
    Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G)
  • Operating Voltage
    5.0 V ± 5%
  • Power Consumption
    Active mode: 160 mA; Idle mode: 80 mA
  • Dimension (L x W x H )
    Without housing: 17.00 x 40.00 x 6.10 mm
    With housing: 19.80 x 41.40 x 7.50 mm
  • MTBF (hours)
    >1,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.