• Built-in hardware Low Density Parity-Check (LDPC) ECC 
  • Wear Leveling
  • Flash bad-block management 
  • Flash Translation Layer: Page Mapping 
  • S.M.A.R.T. 
  • Power Saving Implemented 

Turbocharged USB: UV210-UFD3

Apacer’s UV210-UFD3 is a turbocharged USB designed with the latest USB 3.1 Gen1 as the hardware transmission interface and embedded high-speed multi-channel UFS interface as a storage. With exquisite size and robust metal housing, UV210-UFD3 prevents mechanical interference and enhances environment and ESD protection.

Turbocharged USB supports UFS 2.1 and UHS-I, and UFS transmission protocol is designed with low power and high transmission and solves the transmission bottleneck of the storage component. The overall performance is twice that of a typical USB storage disk, and the transfer rate is more than 435MB/sec. The number of readings per second is around 27,000 IOPS, and the random write speed is 30 times faster than the general USB.

Reliability wise, UV210-UFD3 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. In addition, the drive comes with various implementations including powerful hardware ECC engine, wear leveling, flash block management, S.M.A.R.T., page mapping etc. This product is well suited for portable flash storage applications while operating at minimal power consumption.


  • Model UV210-UFD3
  • Interface USB 3.1 Gen1
  • Connector USB Type A Plug
  • Form Factor USB flash drive
  • NAND Flash Type UFS (3D TLC)
  • Capacity 128GB/256GB
  • External DRAM No
  • Sustained Read Performance (MB/sec) Up to 435
  • Sustained Write Performance (MB/sec) Up to 250
  • ECC Engine Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write) 6800
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Storage Temperature ( °C ) 0 ~ + 70
  • Housing Yes
  • H/W Write Protect No
  • Screw Hole No
  • Cable-less Solution No
  • Thermal Sensor No
  • Shock Operation: 50G/11ms
    (compliant with MIL-STD-202G)
    Non-operation: 1500G/0.5ms
    (compliant with MIL-STD-883K)
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation: 4.02(Grms), 15~2000(Hz)/random
    (compliant with MIL-STD-810G)
  • Operating Voltage 5.0 V ± 5%
  • Power Consumption Active mode: 275 mA; Idle mode: 130 mA
  • Dimension (L x W x H ) 52.7 x 17.03 x 8.21 (mm)
  • MTBF (hours) >3,000,000
  • Technology Page Mapping / S.M.A.R.T.
  • Application Gaming / Healthcare / Server & Networking


  • eDM UV210-UFD3 1.29 MB