Module
UV110-UFM3
UV110-UFM3
- Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
- Global Wear Leveling
- Flash bad-block management
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- Hyper Cache Technology
- SMART Read Refresh™
- Write Protect (Optional)
Industrial USB Module: UV110-UFM3
Apacer’s UV110-UFM3 is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. As an embedded flash storage, UV110-UFM3 is compliant with USB2.0 and backward compliable with USB1.1 interface.
Utilizing 3D NAND for capacity up to 256GB and providing more power efficiency than 2D NAND, UV110-UFM3 can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. Regarding reliability, UV110-UFM3 is implemented with LDPC (Low Density Parity Check) ECC engine to increase data reliability.
In terms of flash management, UV110-UFM3 adopts the latest page mapping file translation layer and comes with various implementations including power saving modes, wear leveling, flash block management, power failure management, S.M.A.R.T., Hyper Cache technology and Smart Read Refresh™.
With cost-effective design, better performance and increased reliability, UV110-UFM3 is well suited for embedded flash storage applications offering new and expanded functionality.
Spec
OPEN- Model UV110-UFM3
- Interface USB 2.0
- Connector 10-pin (2x5) female header in 2.54mm
- Form Factor USB Disk Module
- NAND Flash Type 3D TLC
- Capacity 128GB~256GB
- External DRAM No
- Sequential Read Performance (MB/sec) Up to 37 MB/sec
- Sequential Write Performance (MB/sec) Up to 31 MB/sec
- ECC Engine Low-Density Parity-Check (LDPC) Code
- IOPS (4K Random Write) 400
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -55 ~ 100
- Housing No
- H/W Write Protect Optional
- Screw Hole Yes
-
Shock
Operation: 50G/11ms (compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms (compliant with MIL-STD-883K) -
Vibration
Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02(Grms), 15~2000(Hz)/random
(compliant with MIL-STD-810G) - Operating Voltage 5.0 V ± 5%
- Power Consumption Active mode: 100 mA; Idle mode: 75 mA
- Dimension (L x W x H ) 32.50 mm x 24.00 mm x 5.00 mm
- MTBF (hours) >3,000,000
- Technology Page Mapping / S.M.A.R.T. / Smart Read Refresh™ / Wide Temperature / Write Protect
- Application Defense / Factory Automation / Healthcare / Internet of Things / Server & Networking / Transportation