Module
UH110-UFM3
- Low-Density Parity-Check (LDPC) Code
- Flash bad-block management
- Global Wear Leveling
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- Smart Read Refresh™
- SLC-liteX
Industrial USB Module: UH110-UFM3
Apacer’s UH110-UFM3 is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. As an embedded flash storage, UH110-UFM3 is compliant with USB 2.0 and backward compliable with USB 1.1.
Utilizing 3D NAND for capacity up to 64GB and providing more power efficiency than 2D NAND, UH110-UFM3 can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems.
Regarding reliability, UH110-UFM3 is not only implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability, but also equipped with SLC-liteX technology to offer higher number of P/E cycles up to 30,000 times.
In terms of flash management, UH110-UFM3 adopts the latest Page Mapping file translation layer and comes with various implementations including power saving modes, Wear Leveling, flash block management, power failure management, S.M.A.R.T. and Smart Read Refresh™.
UH110-UFM3 is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability.
Spec
OPEN- Model UH110-UFM3
- Interface USB 2.0
- Connector 10-pin (2x5) female header in 2.54mm
- Form Factor USB Disk Module
- NAND Flash Type 3D TLC
- Capacity 32GB~64GB
- External DRAM No
- Sequential Read Performance (MB/sec) Up to 37
- Sequential Write Performance (MB/sec) Up to 32
- ECC Engine Low-Density Parity-Check (LDPC) Code
- IOPS (4K Random Write) 400
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -55 ~ + 100
- Housing No
- H/W Write Protect Optional
- Screw Hole Yes
-
Shock
Operation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K) -
Vibration
Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G) - Operating Voltage 5.0 V ± 5%
- Power Consumption Active mode: 95 mA; Idle mode: 75 mA
- Dimension (L x W x H ) 32.50 x 24.00 x 5.00 (mm)
- MTBF (hours) >3,000,000
- Technology Page Mapping / SLC-liteX / S.M.A.R.T. / Smart Read Refresh™ / Wide Temperature / Write Protect
- Application Defense / Factory Automation / Healthcare / Internet of Things / Server & Networking / Transportation