Drive

UH110-UFD1

  • Adopts advanced LDPC ECC engine with 3D NAND SLC-liteX technology to improve reliability
  • Global Wear Leveling
  • Flash bad-block management
  • 4K Page Mapping
  • Power Failure Management
  • S.M.A.R.T.
  • Hyper Cache Technology
  • SMART Read Refresh™ 

Industrial USB: UH110-UFD1

Apacer’s UH110-UFD1 utilizes 3D NAND for higher capacity up to 64GB and provides more power efficiency than 2D NAND, with the aim of replacing a conventional IDE hard disk drive. With exquisite size and robust metal housing, UH110-UFD1 prevents mechanical interference and enhances environment and ESD protection.

UH110-UFD1 is a new generation USB flash drive compatible with the latest USB specification – USB 3.1 Gen1 (SuperSpeed) Super Speed, with a maximum transfer rate of 5.0 Gbps. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.1 specification, this USB drive can deliver up to 260 MB/s outstanding performance.

Reliability wise, UH110-UFD1 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip. In addition, the drive comes with various implementations including powerful hardware ECC engine, Wear Leveling, flash block management, S.M.A.R.T., Page Mapping ,etc. This product is well suited for portable flash storage applications while operating at minimal power consumption.

Spec

OPEN
  • Model UH110-UFD1
  • Interface USB 3.1 Gen1
  • Connector USB Type A Plug
  • Form Factor USB flash drive
  • NAND Flash Type 3D TLC
  • Capacity 16GB~64GB
  • External DRAM No
  • Sustained Read Performance (MB/sec) Up to 265
  • Sustained Write Performance (MB/sec) Up to 125
  • ECC Engine Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write) 1100
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
    *Not supported on 16GB
  • Storage Temperature ( °C ) -55 ~ + 100
  • Housing Yes
  • H/W Write Protect No
  • Screw Hole No
  • Cable-less Solution No
  • Thermal Sensor No
  • Shock Operation: 50G/11ms
    (compliant with MIL-STD-202G)
    Non-operation: 1500G/0.5ms
    (compliant with MIL-STD-883K)
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage 5.0 V ± 5%
  • Power Consumption Active mode: 190 mA; Idle mode: 80 mA
  • Dimension (L x W x H ) 46.85 mm x 17.2 mm x 7.7 mm
  • MTBF (hours) >1,000,000
  • Technology Page Mapping / SLC-liteX / S.M.A.R.T. / Smart Read Refresh / Thermal-Shock / Wide Temperature
  • Application Defense / Gaming / Healthcare / Server & Networking

Downloads

OPEN
  • eDM UH110-UFD1 1.32 MB