_image02.png "UDM2A-M LP 90D (Type E)")
_image01.png "UDM2A-M LP 90D (Type E)")
_image02.png "UDM2A-M LP 90D (Type E)")
_image01.png "UDM2A-M LP 90D (Type E)")
Module
UDM2A-M LP 90D (Type E)
- Built-in hardware ECC
- Global wear-leveling
- Flash bad-block management
- S.M.A.R.T.
- Lock switch design for write-protection(Optional)
Introduction
Apacer’s UDM2A-M LP 90D (Type E) is a high performance, highly reliable, high endurance USB2.0 flash disk module in a small form factor designed for embedded applications and the system as a boot drive. As a embedded flash storage, it's compliant with USB2.0 and backward compliable with USB1.1, and connects to the host system via a 10-pin connector. The 10-pin USB connector on the Type E with pitch size 2.00 mm could perfectly fit in low profile system .
Spec
OPEN- Model UDM2A-M LP 90D (Type E)
- Interface USB2.0
- Connector 10 pin USB(2x5) female header in 2.00mm
- Form Factor USB Disk Module
- NAND Flash Type MLC
- Capacity 8G~128G
- Sustained Read Performance (MB/sec) Up to 44
- Sustained Write Performance (MB/sec) Up to 43
- ECC Engine Built-in 72-bit per 1K bytes BCH ECC
- IOPS (4K Random Write) 105
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -40 ~ + 100
- H/W Write Protect Optional
- Screw Hole Yes
-
Shock
Operation: Acceleration, 50(G)/11(ms)/half sine (compliant with MIL-STD-202G)
Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine (compliant with MIL-STD-883K) -
Vibration
Operation: Acceleration, 50(G)/11(ms)/half sine (compliant with MIL-STD-202G)
Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine (compliant with MIL-STD-883K) - Operating Voltage 5V ± 5%
- Power Consumption Active mode: 125 mA & Idle mode:50 mA
- Dimension (L x W x H ) 36.8 x 26.5 x 7.1 (mm)
- MTBF (hours) >1,000,000
- Technology Extended Temperature / S.M.A.R.T. / Conformal Coating / Content Pre-load / Erase / Write Protect
- Application Cloud Computing / Embedded & IPC / Healthcare