2.5" SSD Drive
SV250-25
- Support LDPC ECC
- Global Wear Leveling technology
- Flash Bad-block Management
- S.M.A.R.T. and SSDWidget support
- End-to-End Data Protection
- TRIM Support
- Support TCG Opal 2.0/AES 256-bit encryption
- DataRAID™
- DataDefender™
- Over-provisioning
- Mechanical design available in 7mm height
Introduction
Apacer’s SV250-25 is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations.
SV250-25 utilizes 3D NAND and provides more power efficiency than 2D NAND. Regarding reliability, SV250-25 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip. In addition, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM, and DataDefender™.
In terms of security, Advanced Encryption Standard (AES) and Trusted Computing Group (TCG) Opal ensure data security and provide users with a peace of mind knowing their data is safeguarded against unauthorized use at all times. Furthermore, with End-to-End Data Protection, data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.
Spec
OPEN- Model SV250-25
- Interface SATA 3.2 (6Gb/s)
- Connector (7+15) pin male
-
Form Factor
2.5"
- NAND Flash Type 3D TLC
-
Capacity
30GB~960GB
- External DRAM No
-
Sustained Read Performance (MB/sec)
Up to 560
-
Sustained Write Performance (MB/sec)
Up to 520
-
ECC Engine
Low-Density Parity-Check (LDPC) Code
-
IOPS (4K Random Write)
73K
-
Standard Operating Temperature ( °C )
0 ~ + 70
-
Extended Operating Temperature ( °C )
-40 ~ + 85
-
Storage Temperature ( °C )
-40 ~ + 100
-
Thermal Sensor
Yes
-
Shock
Operation: Acceleration, 50(G)/11(ms)/half sine (compliant with MIL-STD-202G)
Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine (compliant with MIL-STD-883K) -
Vibration
Operation:7.69(Grms), 20~2000(Hz)/random (compliant with MIL-STD-810G)
Non-operation:4.02(Grms), 15~2000(Hz)/random (compliant with MIL-STD-810G) - Operating Voltage 5.0 V±5%
-
Power Consumption
Active mode: 330 mA / Idle mode: 95 mA
-
Dimension (L x W x H )
7mm:100.00 x 69.85 x 6.90mm
9.5mm: 100.00 x 69.85 x 9.3mm -
MTBF (hours)
>3,000,000
- Technology ATA Secure Erase / Conformal Coating / Content Pre-load / CoreAnalyzer2 / DataDefender™ / DataRAID™ / DEVSLP / Double-barreled Solution / End-to-end Data Protection / Erase / Nano Coating / Opaque / Over-provisioning / Page Mapping / S.M.A.R.T. / Smart Read Refresh™ / SSDWidget 2.0 / TCG Opal 2.0 / Thermal Sensor / Thermal Throttling / Wide Temperature / Write Protect / 30µ Gold Finger
- Application Gaming / Healthcare / Server & Networking / Transportation