CFast
SU220-CFast
- Built-in hardware ECC
- Global wear-leveling
- Flash bad-block management
- S.M.A.R.T.
- Power failure management
- SLC-lite technology
- ATA secure erase
- TRIM
- Supports CoreAnalyzer
Introduction
Along with SM220-CFast MLC product family, Apacer offers SU220-CFast with more enhanced endurance than MLC by implementing SLC-Lite technology. SLC-lite is Apacer's proprietary technology that strikes a cost-performance balance between MLC and SLC flash types and it is an ideal alternative solution for mission-critical embedded or industrial applications. This new flash memory card comes with SATA 6.0 Gbps interface for higher performance and consists of SATA-based 7-pin signal segment and 17-pin for power and control purposes. For data efficiency, the internal controlling unit of the SU220-CFast is engineered with DRAM for enhanced random performance which achieves data transfer rates up to 535 MB/s in sequential access and 68,000 IOPS in 4KB random access. In addition, Apacer CFast cards come with S.M.A.R.T. for lifetime monitoring and customization support if write protection is required. Apacer SU220-CFast guarantees reliability of applications in harsh environments by implementing intelligent Flash Management algorithms and Error Correction. Together with its small form factor nature, Apacer SU220-CFast is definitely the ideal solution to replace conventional PATA-based CompactFlash for applications in industrial computing systems, mobile computers and video processing instruments.
Spec
OPEN- Model SU220-CFast
- Interface SATA 3.0 (6Gb/s)
- Connector (7+17) pin female
- Form Factor CFast
- NAND Flash Type MLC
- Capacity 8GB~128GB
- External DRAM Yes
- Sustained Read Performance (MB/sec) Up to 535
- Sustained Write Performance (MB/sec) Up to 480
- ECC Engine Built-in 72-bit per 1K bytes BCH ECC
-
IOPS (4K Random Write)
61K
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -40 ~ + 100
- H/W Write Protect Optional
- Thermal Sensor Optional
-
Shock
Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms -
Vibration
Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 15 G, 10 ~ 2000 Hz/sine - Operating Voltage 3.3 V ± 5%
- Power Consumption Active mode: 435 mA & Idle mode: 105 mA
- Dimension (L x W x H ) 36.4 x 42.8 x 3.6 mm (mm)
- MTBF (hours) >1,000,000
- Technology ATA Secure Erase / Conformal Coating / Content Pre-load / DEVSLP / Erase / Nano Coating / Page Mapping / SLC-lite / S.M.A.R.T. / SSDWidget 2.0 / Thermal Sensor / Thermal Throttling / Wide Temperature / 30µ Gold Finger
- Application Defense / Gaming / Healthcare / Server & Networking / Transportation