1.8" SSD Drive
SS210-18
- Built-in hardware ECC
- Global Wear Leveling
- Flash bad-block management
- S.M.A.R.T. Function
- Power Failure Management
- Device Sleep(optional)
- ATA Secure Erase
- TRIM Support
Introduction
Apacer’s SS210-18 is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6 Gb/s interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations. In regard of reliability, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM, and power failure management.
Spec
OPEN- Model SS210-18
- Interface SATA 3.1 (6Gb/s)
- Connector (7+9) pin male
- Form Factor 1.8 inch
- NAND Flash Type SLC
- Capacity 32GB~128GB
- External DRAM Yes
- Sequential Read Performance (MB/sec) Up to 560 MB/sec
- Sequential Write Performance (MB/sec) Up to 440 MB/sec
- ECC Engine Built-in 72 bit per 1K bytes BCH ECC
- IOPS (4K Random Write) 76K
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -40 ~ 100
- Housing Yes
- Thermal Sensor No
-
Shock
Operation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K) -
Vibration
Operation: Random, 7.69(Grms), 20~2000(Hz)
Non-operation: Sine wave, 15(G), 10~2000(Hz) - Operating Voltage 3.3V ± 5% / 5V ± 5%
-
Power Consumption
3.3V: 840 / 80
5V: 560 / 70 - Dimension (L x W x H ) 78.50 mm x 54.00 mm x 5.00 mm
- MTBF (hours) >2,000,000
- Technology ATA Secure Erase / DEVSLP / Erase / Page Mapping / S.M.A.R.T. / Smart Read Refresh™ / SSDWidget 2.0 / Thermal Cycling / Wide Temperature
- Application Defense / Internet of Things / Server & Networking