CFast
SM230-CFast
- Built-in hardware ECC
- Global Wear Leveling
- Flash bad-block management
- S.M.A.R.T. SSD Widget
- Power Failure Management
- TRIM Support
- Support TCG Opal 2.0/AES 256-bit hardware encryption
Introduction
Apacer SM230-CFast 2.0 is the latest enhancement of conventional CFast form factor that delivers various technological advantages. This new flash memory card comes with SATA 6.0 Gbps interface for higher performance and consists of SATA-based 7-pin signal segment and 17-pin for power and control purposes. Designed without DRAM on the internal controlling unit, SM230-CFast ensures data integrity by preventing data loss during a sudden power outage.
Spec
OPEN- Model SM230-CFast
- Interface SATA 3.0 (6Gb/s)
- Connector 7 + 17 pin female connector
- Form Factor CFast
- NAND Flash Type MLC
-
Capacity
8GB~256GB
- External DRAM No
- Sustained Read Performance (MB/sec) Up to 560
- Sustained Write Performance (MB/sec) Up to 465
- ECC Engine Built-in up to 72-bit per 1K bytes BCH ECC
- IOPS (4K Random Write) 41K
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -40 ~ + 100
- Housing YES
- H/W Write Protect YES
- Thermal Sensor YES
-
Shock
Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms -
Vibration
Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G) - Operating Voltage 3.3 V±5%
-
Power Consumption
Active mode: 645 mA / Idle mode: 135 mA
- Dimension (L x W x H ) 42.80mm x 36.45mm x 3.60mm
- MTBF (hours) >1,000,000
- Technology Wide Temperature / CoreAnalyzer2 / CoreSecurity / Page Mapping / SSDWidget2.0 / Thermal Sensor / S.M.A.R.T. / DEVSLP / Conformal Coating / Nano Coating / Content Pre-load / 30µ Gold Contact / Write Protect
- Application Cloud Computing / Transportation / Embedded & IPC / Defense / Gaming / Healthcare