SSD Module
SH250-7LP2 90D
- Low-Density Parity-Check(LDPC)Code
- Global Wear Leveling
- Flash bad-block management
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- Power Failure Management
- ATA Secure Erase
- TRIM Support
- Hyper Cache Technology
- Over-Provisioning
- SMART Read Refresh™
- SLC-liteX
Introduction
Apacer SH250-7LP2 90D (SATA Disk Module 7Pin/90 Degree Low Profile 2) is a super-mini industrial SSD module, utilizing 3D NAND for higher capacity up to 40GB and provides more power efficiency than 2D NAND. Designed in SATA 6.0 Gb/s interface, SH250-7LP2 can deliver outstanding performance up to 310MB/s in reading and 305MB/s in writing, highly suitable to serve as operating system boot drive or storage media of important data.
For data efficiency, the internal controlling unit of the product is engineered with a DRAM as a write cache for enhanced random performance and endurance. With Apacer’s SLC-liteX technology, SH250-7LP2 performs with higher number of P/E cycles up to 30,000 times. Besides, SH250-7LP2 features Apacer Multi-PowerPath technology that provides three methods to supply power to the host either via a conventional cable or cable-less design via pin7 or state-of-art 7+2 pin connector, which in turn offers developers maximum flexibility when it comes to board design.
Moreover, the device adopts the latest page mapping file translation layer and thermal throttling function, making it a powerful yet compact solution for space-limited design. Regarding reliability, SH250-7LP2 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability.
Spec
OPEN- Model SH250-7LP2 90D
- Interface SATA 3.2 (6Gb/s)
- Connector 7-pin
- Form Factor SATA Disk Module
- NAND Flash Type 3D TLC
- Capacity 10GB ~ 40GB
- External DRAM No
- Sequential Read Performance (MB/sec) Up to 310
- Sequential Write Performance (MB/sec) Up to 305
- ECC Engine Low-Density Parity-Check (LDPC) Code
- IOPS (4K Random Write) 69K
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -40 ~ + 100
- Housing Optional
- H/W Write Protect Optional
- Screw Hole No
- Cable-less Solution Optional (7+2 cable-less, Pin 7 Power cable-less)
- Thermal Sensor Yes
-
Shock
Operation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K) -
Vibration
Operation: 7.69 GRMS, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02 GRMS, 15~2000 Hz/random
(compliant with MIL-STD-810G) - Operating Voltage 5V ± 5%
- Power Consumption Active mode: 235 mA / Idle mode: 55 mA
- Dimension (L x W x H ) 33.00 x 29.30 x 8.85 mm
- MTBF (hours) >3,000,000
- Technology AES 256-bit Encryption / ATA Secure Erase / DataRAID™ / End-to-end Data Protection / Multi-PowerPath / Over-provisioning / Page Mapping / Power Cable-less / SLC-liteX / S.M.A.R.T. / Smart Read Refresh™ / SSDWidget 2.0 / TCG Opal 2.0 / Thermal Sensor / Wide Temperature
- Application Factory Automation / Gaming / Healthcare / Internet of Things / Server & Networking / Transportation