Apacer Industrial - The most reliable storage and memory for industries

HomeSSDSATA/PATAmSATA (MO-300)SH250-300

mSATA (MO-300)

SH250-300

  • Low-Density Parity-Check (LDPC) Code
  • Global Wear Leveling
  • Flash Bad-block Management
  • Flash Translation Layer: Page Mapping
  • S.M.A.R.T.
  • DataDefender™
  • Device Sleep
  • ATA Secure Erase
  • TRIM
  • SAMRT Read Refresh™
  • SLC-liteX (P/E cycle: 100K)
Features Introduction Specification Downloads Back TOP

Introduction

Apacer’s SH250-300 is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations.

SH250-300 utilizes 3D NAND for higher capacity up to 160GB and provides more power efficiency than 2D NAND. Appearing in SH250-300 mechanical dimensions, SH250-300 is believed to be the leading add-in storage solution for future host computing systems. Regarding reliability, SH250-300 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. With Apacer’s SLC-liteX technology, SH250-300 performs with higher number of P/E cycles up to 100,000 times. Since it is operating under SATA 6.0 Gbps interface, SH250-300 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis. In addition, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, wear leveling, flash block management, TRIM and DataDefender™.

In terms of security, Advanced Encryption Standard (AES) ensures data security and provide users with a peace of mind knowing their data is safeguarded against unauthorized use at all times. Furthermore, with End-to-End Data Protection, data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.

Spec

OPEN
  • Model SH250-300
  • Interface SATA 3.2 (6Gb/s)
  • Connector 52-pin mSATA connector
  • Form Factor JEDEC MO-300
  • NAND Flash Type 3D TLC
  • Capacity 10GB~160GB
  • External DRAM No
  • Sequential Read Performance (MB/sec) Up to 560
  • Sequential Write Performance (MB/sec) Up to 510
  • ECC Engine Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write) 70K
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 100
  • Thermal Sensor Yes
  • Shock Operation: 50G/11ms
    Non-operation: 1500G/0.5ms
    (compliant with MIL-STD-883K)
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine
    (compliant with MIL-STD-810G)
  • Operating Voltage 3.3 V ± 5%
  • Power Consumption Active mode:420 mA / Idle mode: 65 mA
  • Dimension (L x W x H ) 50.80 x 29.85 x 4.85 mm
  • MTBF (hours) >3,000,000
  • Technology AES 256-bit Encryption / CoreAnalyzer2 / DataDefender™ / DEVSLP / Page Mapping / SLC-liteX / S.M.A.R.T. / SSDWidget 2.0 / Thermal Sensor / Wide Temperature
  • Application Factory Automation / Gaming / Healthcare / Internet of Things / Server & Networking / Transportation

Downloads

OPEN
  • eDM SH250-300 1.61 MB