2.5" SSD Drive

SH250-25

  • Support LDPC ECC
  • Global Wear Leveling technology
  • S.M.A.R.T. and SSDWidget support
  • End-to-End Data Protection
  • TRIM Support
  • AES256 support
  • SLC-liteX
  • Over-Provisioning
  • DataDefender™
  • Mechanical design available in 7mm height

Introduction

Apacer’s SH250-25 is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations.

SH250-25 utilizes 3D NAND for higher capacity up to 320GB and provides more power efficiency than 2D NAND. With Apacer’s SLC-liteX technology, SH250-25 performs with higher number of P/E cycles up to 30,000 times. Regarding reliability, SH250-25 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. In addition, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM and DataDefender™.

In terms of security, Advanced Encryption Standard (AES) ensures data security and provide users with a peace of mind. Furthermore, with End-to-End Data Protection, data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.

Spec

OPEN
  • Model SH250-25
  • Interface SATA 3.2 (6Gb/s)
  • Connector (7+15) pin
  • Form Factor 2.5"
  • NAND Flash Type 3D TLC
  • Capacity 10GB~320GB
  • External DRAM No
  • Sustained Read Performance (MB/sec) Up to 560
  • Sustained Write Performance (MB/sec) Up to 520
  • ECC Engine Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write) 74K
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 100
  • Thermal Sensor Yes
  • Shock Operation: 50G/11ms
    (compliant with MIL-STD-202G)
    Non-operation: 1500G/0.5ms
    (compliant with MIL-STD-883K)
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine
    (compliant with MIL-STD-810G)
  • Operating Voltage 5.0 V±5%
  • Power Consumption Active mode: 320 mA / Idle mode: 85 mA
  • Dimension (L x W x H ) 7mm:100.00 x 69.85 x 6.90mm
  • MTBF (hours) >1,000,000
  • Technology CoreAnalyzer2 / Conformal Coating / Content Pre-load / DEVSLP / DataDefender / Erase / Nano Coating / Page Mapping / Over-provisioning / SLC-liteX / S.M.A.R.T. / SSDWidget 2.0 / Thermal Sensor / Wide Temperature
  • Application Factory Automation / Gaming / Healthcare / Server & Networking / Transportation

Downloads

OPEN
  • eDM SH250-25_eDM 1.36 MB