2.5" SSD Drive
SFD25A
- Longevity and Long Usage Life
- Advanced 4K Page Mapping Technology
- Excellent IOPs
- Wide Temperature support
- Built-in ATA Secure Erase and S.M.A.R.T. Functions
- Intelligent Power Failure Recovery
- DEVSLP Support (Optional)
- 9.5mm and 7mm Housing (Optional)
Introduction
Apacer SFD25A is designed with SLC Flash Techonology to meet the most demanding Industrial and Military environment. Featured in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading Industrial and mission-critical Military applications. In regard of reliability, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, global wear leveling, flash block management, S.M.A.R.T., TRIM, and power failure management
Spec
OPEN- Model SFD25A
- Interface SATA 3.0 (6Gb/s)
- Connector (7+15) pin male
- Form Factor 2.5
- NAND Flash Type SLC
- Capacity 8GB~256GB
- External DRAM Yes
- Sustained Read Performance (MB/sec) Up to 530
- Sustained Write Performance (MB/sec) Up to 445
- ECC Engine Built-in 40-bit per 1K bytes BCH ECC
- IOPS (4K Random Write) 76K
- Standard Operating Temperature ( °C ) 0 ~ + 70
- Extended Operating Temperature ( °C ) -40 ~ + 85
- Storage Temperature ( °C ) -40 ~ + 100
- Thermal Sensor Optional
-
Shock
Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms -
Vibration
Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 15 G, 10 ~ 2000 Hz/sine - Operating Voltage 5.0 V ± 5%
- Power Consumption Active mode: 500 mA & Idle mode: 105 mA
- Dimension (L x W x H ) 100 x 69.8 x 9.3 / 100 x 69.8 x 7 (mm)
- MTBF (hours) >2,000,000
- Technology Extended Temperature / CoreAnalyzer / Page Mapping / SSDWidget / Thermal Sensor / S.M.A.R.T. / DEVSLP / Conformal Coating / Nano Coating / Content Pre-load / Erase
- Application Embedded & IPC / Defense / Healthcare