microSD
CV120-MSD
- Built-in advanced ECC algorithm
- Global Wear Leveling
- Flash bad-block management
- Power Failure Management
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- SMART Read Refresh™
Introduction
Apacer microSD CV120-MSD is compatible with the microSD card version 6.1. The command list supports [Physical Layer Specification Ver6.10 Final] definitions. Card Capacity of Non-secure Area, Secure Area Supports [Part 3 Security Specification Ver4.0 Final] Specifications.
The microSD 6.1 card comes with 8-pin interface. It can alternate communication protocols between the SD mode and SPI mode. It performs data error detection and correction with very low power consumption and supports capacity up to 256GB with exFAT SDXC.
Apacer microSD CV120-MSD Secure Digital 6.1 with high performance, good reliability and wide compatibility is nowadays one of the most popular cards with customized firmware techniques in semi-industrial/medical markets already.
Spec
OPEN- Model CV120-MSD
- Interface SD 6.1
- Form Factor Micro SD
- NAND Flash Type 3D TLC
- Capacity 64GB~256GB
- Sequential Read Performance (MB/sec) Up to 90
- Sequential Write Performance (MB/sec) Up to 85
- ECC Engine Built-in advanced ECC algorithm
- IOPS (4K Random Write) 1900
- Standard Operating Temperature ( °C ) -25 ~ +85
- Extended Operating Temperature ( °C ) -40 ~ +85
- Storage Temperature ( °C ) -40 ~ +85
- Shock (Operating) 1,500G, 0.5ms
-
Vibration
20Hz~80Hz/1.52mm (frequency/displacement)
80Hz~2,000Hz/20G (frequency/accelerate) - Operating Voltage 2.7V ~ 3.6V
- Power Consumption Active mode: 80 mA & Idle mode: 190 uA
- Dimension (L x W x H ) 15x11x1 (mm)
- MTBF (hours) >3,000,000
- Technology ESD Protection / Page Mapping / S.M.A.R.T. / Smart Read Refresh™
- Application Gaming / Healthcare / Server & Networking / Transportation