Apacer Industrial - The most reliable storage and memory for industries

HomeSSDIndustrial CardCFCM710-CF

CF

CM710-CF

  • Global Wear Leveling
  • Built-in BCH ECC capable of correcting up to 96 bits in 1KB data
  • Supports S.M.A.R.T commands
  • Flash Block Management
  • Power Failure Management
     
Features Introduction Specification Downloads Back TOP

Introduction

Apacer industrial CM710-CF card is compliant with the CF 6.1 standard compatible specifications.

Apacer adopts the standard 50-pin connector and MLC chip with higher capacity for the card. It is available in capacities from 8GB to 128GB. The data transfer mode is up to PIO Mode 6, Multiword DMA Mode 4, Ultra DMA Mode 6, with the sequential read/write speed reaching as fast as 95/55 MB/sec.

To help data stay correct, this CM710-CF memory card also supports 96-bit ECC function, wear-leveling function,S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) and supply voltage power-down detection for full power-down robustness,thereby substantially enhancing product reliability.

Spec

OPEN
  • Model CM710-CF
  • Interface PC Card Memory Mode; PC Card I/O Mode; True IDE Mode
  • Connector 50-pin
  • Form Factor CompactFlash Type I
  • Transfer Mode PIO Mode 6, Multiword DMA Mode 4, Ultra DMA Mode 6
  • NAND Flash Type MLC
  • Capacity 8GB~128GB
  • External DRAM No
  • Sustained Read Performance (MB/sec) Up to 95
  • Sustained Write Performance (MB/sec) Up to 55
  • ECC Engine Built-in BCH ECC capable of correcting up to 96 bits in 1KB data
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 100
  • H/W Write Protect No
  • Thermal Sensor No
  • Shock Operation: 50G, 11ms
    Non-operation: 1500G, 0.5ms
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine
  • Operating Voltage 3.3 V / 5.0 V ± 5%
  • Power Consumption Operating Voltage: 3.3V
    – Active mode: 165 mA
    – Standby mode: 10 mA

    Operating Voltage: 5.0V
    – Active mode: 170 mA
    – Standby mode: 10 mA
  • Dimension (L x W x H ) 36.4mm x 42.8mm x 3.3mm
  • MTBF (hours) >1,000,000
  • Technology ATA Secure Erase / Page Mapping / S.M.A.R.T. / Wide Temperature
  • Application Defense / Gaming / Healthcare / Server & Networking / Transportation

Downloads

OPEN
  • eDM CM710-CF 2 MB