HalfSlim (MO-297)

SFD18S6

  • Compliant with JEDEC MO-297 standard
  • Global Wear-leveling and Block Management
  • Built-in ATA Secure Erase and S.M.A.R.T. Functions
  • TRIM Command Support
  • DEVSLP Support (Optional)
  • Power failure management

Introduction

Apacer’s SFD18S6 is a well-balanced solid-state disk (SSD) drive with compact form factor and great performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading industrial or server operations. In regard of reliability, the drive comes with various implementations including powerful hardware ECC engine, power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM, and power failure management. With capacity ranging from 4GB to 128GB, Apacer SFD18S6 HS is equipped with the SATA3.0 high-speed interface delivering a continuous read/write speed at 530/445MB respectively.

Spec

OPEN
  • Model SFD18S6
  • Interface SATA 3.0 (6Gb/s)
  • Connector (7+15) pin male
  • Form Factor JEDEC (MO297)
  • NAND Flash Type SLC
  • Capacity 4GB~128GB
  • External DRAM Yes
  • Sustained Read Performance (MB/sec) Up to 530
  • Sustained Write Performance (MB/sec) Up to 445
  • ECC Engine Built-in 40-bit per 1K bytes BCH ECC
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 100
  • Thermal Sensor Optional
  • Shock 1500G (complied with MIL-STD810)
  • Vibration 15G (complied with MIL-STD810)
  • Operating Voltage 5.0 V ± 5%
  • Power Consumption Active mode: 470 mA & Idle mode: 95 mA
  • Dimension (L x W x H ) 54 x 39.8 x 4 (mm)
  • MTBF (hours) >2,000,000
  • Technology Page Mapping / Wide Temperature / Thermal Sensor / S.M.A.R.T. / DEVSLP / Content Pre-load / Erase / Write Protect
  • Application Cloud Computing / Transportation / Embedded & IPC / Military / Healthcare

Downloads

OPEN
  • eDM SFD18S6 4.73 MB