SSD Module

SDM5A 7P/180D LP(H)

  • 7-pin SATA connector
  • Unique Hook Design
  • Power Cable-less Solution
  • Perfect Solution for 1U System
  • TRIM Command Support
  • Product Housing Selection (Optional)
  • Built-in ATA Secure Erase and S.M.A.R.T. Functions
  • Global Wear-Leveling and Block Management

Introduction

Apacer’s SDM5A (SATA Disk Module 5A) is our next generation disk-on-module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6.0 Gb/s interface, SDM5A delivers higher performance in data transfer than its previous SDM selections, reaching up to 435 MB/s in read and 215 MB/s in write.
With its SATA interface compliance and compact size, this high-speed disk module defines an ideal balance of performance, capacities, reliability and cost. SDM5A comes in moderate capacities that are suitable to boot industrial applications and light operating systems for specific operations, while with some extra memory space for data storage. The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space.
Regarding data reliability, SDM5A is built in with powerful ECC engine that can correct up to 40 bits per 1KB data. In addition, the controller unit of this DOM device supports wear-leveling, SMART and power failure management for data integrity. With its trustable reliability, performance and cost effectiveness, Apacer’s SDM5A is definitely the ideal storage or cache solution for embedded and industrial computers, servers and thin clients.

Spec

OPEN
  • Model SDM5A 7P/180D LP(H)
  • Interface SATA 3.0 (6Gb/s)
  • Connector 7-pin
  • Form Factor SATA Disk Module
  • NAND Flash Type SLC
  • Capacity Standard Type: 1GB~16GB
    High-speed Type: 8GB~32GB (in cable-less type only)
  • External DRAM No
  • Sustained Read Performance (MB/sec) Standard Type:Up to 34
    High-speed Type:Up to 435
  • Sustained Write Performance (MB/sec) Standard Type:Up to 55
    High-speed Type:Up to 215
  • ECC Engine Built-in 40-bit per 1K bytes BCH ECC
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 100
  • Housing Optional
  • H/W Write Protect No
  • Screw Hole No
  • Cable-less Solution Optional (7+2 pin)
  • Shock Operation: 50G, 11ms
    Non-operation: 1500G, 0.5ms
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G)
  • Operating Voltage 5.0 V±5%
  • Power Consumption Standard Type:
    Active mode: 165 mA & Idle mode: 65 mA
    High-speed Type:
    Active mode: 260 mA & Idle mode: 60 mA
  • Dimension (L x W x H ) Without housing:
    Standard type: 30.0 x 27.8 x 8.2 mm
    High-speed type: 30.0 x 27.8 x 7.4 mm
    With housing:
    32.5 x 29.4 x 8.53 mm
  • MTBF (hours) >2,000,000
  • Technology Page Mapping / Power Cable-less / Extended Temperature / S.M.A.R.T. / Erase
  • Application Transportation / Embedded & IPC / Military / Gaming

Downloads

OPEN
  • eDM SDM5A 7P 180D LP(H) 1.18 MB