SSD Module

SDM5 7P/90D MP

  • Power Cable-less solution
  • Patented 7-pin Female SATA Hooked Connector
  • Built-in ATA Secure Erase and S.M.A.R.T. Function
  • Product Housing Selection (Optional)
  • Intelligent Power Failure Recovery
  • Trim Command Support
  • MLC Extended Temperature Support

Introduction

Apacer's SDM5 (SATA Disk Module 5) 7P/90D MP is our next generation disk-on-module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6.0 Gb/s interface, SDM5 delivers exceptional performance in data transfer.

With its SATA interface compliance and compact size, this high-speed disk module defines an ideal
balance of performance, capacities, reliability and cost. SDM5 is effective in boot industrial applications and light operating systems for specific operations, while with some extra memory space for data storage.The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space.

Regarding data reliability, SDM5 is built in with powerful ECC engine that can correct up to 40-bit per 1KB data. In addition, the controller unit of this DOM device supports wear-leveling, SMART and power failure management for data integrity. Wit its trustable reliability, performance and cost effectiveness, Apacer’s SDM5 is definitely the ideal storage or cache solution for embedded and industrial computers, servers and thin clients.

Spec

OPEN
  • Model SDM5 7P/90D MP
  • Interface SATA 3.0 (6Gb/s)
  • Connector 7-pin
  • Form Factor SATA Disk Module
  • NAND Flash Type SLC
  • Capacity 1GB~32GB
  • External DRAM No
  • Sustained Read Performance (MB/sec) Up to 80
  • Sustained Write Performance (MB/sec) Up to 75
  • ECC Engine Built-in 40-bit per 1K bytes BCH ECC
  • Standard Operating Temperature ( °C ) 0 ~ + 70
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 100
  • Housing No
  • H/W Write Protect Yes
  • Screw Hole Yes
  • Cable-less Solution Optional (7+2 pin)
  • Shock Operation: 50G, 11ms
    Non-operation: 1500G, 0.5ms
  • Vibration Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
    Non-operation: 15 Grms, 10 ~ 2000 Hz/sine
  • Operating Voltage 5.0 V ± 5%
  • Power Consumption Active mode: 180 mA & Idle mode: 60 mA
  • Dimension (L x W x H ) 58.0 x 24.0 x 15.2 mm
  • MTBF (hours) >2,000,000
  • Technology Power Cable-less / Wide Temperature / S.M.A.R.T. / Write Protect
  • Application Transportation / Embedded & IPC / Military / Gaming

Downloads

OPEN
  • eDM SDM5 7P 90D MP 1.17 MB