SD

Industrial SD H1-SL

Compliant with SD 3.0 Specification
S.M.A.R.T Supported
Support SD Mode and SPI Mode
Wear-leveling and Block Management
Support Class 10 with UHS-I
SLC-Lite Technology
Low Power Consumption
Auto Read Refresh
Power Failure Management

Introduction

"Apacer Industrial Secure Digital 3.0 card is ideal for its high performance, good reliability and wide compatibility, not to mention that it’s well adapted for hand-held applications in semi-industrial/medical markets already. The H1-SL series providing wide range capacities from 4GB to 64GB fully compliant to SD3.0, and SD2.0 specifications are built with MLC NAND Flash and the latest firmware including read disturb , wear leveling & bad block management algorithms Furthermore, with Apacer’s SLC-lite technology, it performs with higher number of P/E cycles up to 20,000 , but lower cost than SLC. This product is well suited for portable flash storage applications while operating at minimal power consumption.

"

Spec

OPEN
  • Model Industrial SD H1-SL
  • Interface SD3.0
  • Form Factor SD
  • Operation Mode NULL
  • Transfer Mode NULL
  • NAND Flash Type MLC
  • Capacity SDHC:4GB~64B
  • Sustained Read Performance (MB/sec) Up to 43
  • Sustained Write Performance (MB/sec) Up to 40
  • ECC Engine Built-in 42-bit per 1K bytes BCH ECC
  • Standard Operating Temperature ( °C ) -25 ~ + 85
  • Extended Operating Temperature ( °C ) -40 ~ + 85
  • Storage Temperature ( °C ) -40 ~ + 85
  • Shock (Operating)1,500G, 0.5ms
  • Vibration 20Hz~80Hz/1.52mm (frequency/displacement)
    80Hz~2,000Hz/20G (frequency/accelerate)
  • Operating Voltage 3.3 V ± 5%
  • Power Consumption Active mode: 145 mA & Idle mode: 240 uA
  • Dimension (L x W x H ) 32x24x2.1 (mm)
  • MTBF (hours) >3,000,000
  • Technology CoreAnalyzer / Page Mapping / SLC-lite / Wide Temperature / S.M.A.R.T. / Content Pre-load / Write Protect
  • Application Cloud Computing / Transportation / Embedded & IPC / Gaming / Healthcare

Downloads

OPEN
  • eDM Industrial SD H1-SL 1.09 MB